Composite testing - Engineering bibliographies - in Harvard style

In-text: (Aghazadeh Mohandesi and Majidi, 2009)

Your Bibliography: Aghazadeh Mohandesi, J. and Majidi, B., 2009. Fatigue damage accumulation in carbon/epoxy laminated composites. Materials & Design, 30(6), pp.1950-1956.

In-text: (Aldajah and Haik, 2012)

Your Bibliography: Aldajah, S. and Haik, Y., 2012. Transverse strength enhancement of carbon fiber reinforced polymer composites by means of magnetically aligned carbon nanotubes. Materials & Design, 34, pp.379-383.

In-text: (Arnautov and Tarnopol'skii, 2004)

Your Bibliography: Arnautov, A. and Tarnopol'skii, Y., 2004. Longitudinal Flexure as a Method for Determining the Flexural Strength of Composite Materials. Mechanics of Composite Materials, 40(1), pp.17-28.

In-text: (Ashouri Vajari, González, Llorca and Legarth, 2014)

Your Bibliography: Ashouri Vajari, D., González, C., Llorca, J. and Legarth, B., 2014. A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. Composites Science and Technology, 97, pp.46-54.

In-text: (Asp, Berglund and Gudmundson, 1995)

Your Bibliography: Asp, L., Berglund, L. and Gudmundson, P., 1995. Effects of a composite-like stress state on the fracture of epoxies. Composites Science and Technology, 53(1), pp.27-37.

In-text: (Baral, Guezenoc, Davies and Baley, 2008)

Your Bibliography: Baral, N., Guezenoc, H., Davies, P. and Baley, C., 2008. High modulus carbon fibre composites: Correlation between transverse tensile and mode I interlaminar fracture properties. Materials Letters, 62(6-7), pp.1096-1099.

In-text: (Blassiau, Thionnet and Bunsell, 2006)

Your Bibliography: Blassiau, S., Thionnet, A. and Bunsell, A., 2006. Micromechanisms of load transfer in a unidirectional carbon fibre–reinforced epoxy composite due to fibre failures. Part 1: Micromechanisms and 3D analysis of load transfer: The elastic case. Composite Structures, 74(3), pp.303-318.

In-text: (Brynk, Molak, Janiszewska and Pakiela, 2012)

Your Bibliography: Brynk, T., Molak, R., Janiszewska, M. and Pakiela, Z., 2012. Digital Image Correlation measurements as a tool of composites deformation description. Computational Materials Science, 64, pp.157-161.

In-text: (Bunsell and Renard, 2005)

Your Bibliography: Bunsell, A. and Renard, J., 2005. Fundamentals of fibre reinforced composite materials. Bristol: Institute of Physics Pub.

In-text: (CHAMBERS, EARL, SQUIRES and SUHOT, 2006)

Your Bibliography: CHAMBERS, A., EARL, J., SQUIRES, C. and SUHOT, M., 2006. The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications. International Journal of Fatigue, 28(10), pp.1389-1398.

In-text: (Creighton and Clyne, 2000)

Your Bibliography: Creighton, C. and Clyne, T., 2000. The compressive strength of highly-aligned carbon-fibre/epoxy composites produced by pultrusion. Composites Science and Technology, 60(4), pp.525-533.

In-text: (Czabaj and Ratcliffe, 2013)

Your Bibliography: Czabaj, M. and Ratcliffe, J., 2013. Comparison of intralaminar and interlaminar mode I fracture toughnesses of a unidirectional IM7/8552 carbon/epoxy composite. Composites Science and Technology, 89, pp.15-23.

In-text: (Davidson, Sun and Vinciquerra, 2007)

Your Bibliography: Davidson, B., Sun, X. and Vinciquerra, A., 2007. Influences of Friction, Geometric Nonlinearities, and Fixture Compliance on Experimentally Observed Toughnesses from Three and Four-point Bend End-notched Flexure Tests. Journal of Composite Materials, 41(10), pp.1177-1196.

In-text: (Davies, Blackman and Brunner, 1998)

Your Bibliography: Davies, P., Blackman, B. and Brunner, A., 1998. Applied Composite Materials, 5(6), pp.345-364.

In-text: (de Kok and Meijer, 1999)

Your Bibliography: de Kok, J. and Meijer, H., 1999. Deformation, yield and fracture of unidirectional composites in transverse loading. Composites Part A: Applied Science and Manufacturing, 30(7), pp.905-916.

In-text: (De MORAIS et al., 2004)

Your Bibliography: De MORAIS, A., REBELO, C., De CASTRO, P., MARQUES, A. and DAVIES, P., 2004. Interlaminar fracture studies in Portugal: past, present and future. Fatigue & Fracture of Engineering Materials & Structures, 27(9), pp.767-773.

In-text: (Dufort, Drapier and Grédiac, 2001)

Your Bibliography: Dufort, L., Drapier, S. and Grédiac, M., 2001. Closed-form solution for the cross-section warping in short beams under three-point bending. Composite Structures, 52(2), pp.233-246.

In-text: (Farmand-Ashtiani, Cugnoni and Botsis, 2015)

Your Bibliography: Farmand-Ashtiani, E., Cugnoni, J. and Botsis, J., 2015. Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite. International Journal of Solids and Structures, 55, pp.58-65.

In-text: (Fathi, Esfandeh, Soltani and Taghavian, 2014)

Your Bibliography: Fathi, B., Esfandeh, M., Soltani, A. and Taghavian, H., 2014. Effect of Corona Discharge Treatment on Dynamic Mechanical Properties of Unsaturated Polyester/Carbon Fiber Pultruded Composites. Polymer-Plastics Technology and Engineering, 53(2), pp.162-166.

In-text: (Fiedler et al., 2001)

Your Bibliography: Fiedler, B., Hojo, M., Ochiai, S., Schulte, K. and Ando, M., 2001. Failure behavior of an epoxy matrix under different kinds of static loading. Composites Science and Technology, 61(11), pp.1615-1624.

In-text: (González and LLorca, 2007)

Your Bibliography: González, C. and LLorca, J., 2007. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling. Composites Science and Technology, 67(13), pp.2795-2806.

In-text: (Grandidier, Casari and Jochum, 2012)

Your Bibliography: Grandidier, J., Casari, P. and Jochum, C., 2012. A fibre direction compressive failure criterion for long fibre laminates at ply scale, including stacking sequence and laminate thickness effects. Composite Structures, 94(12), pp.3799-3806.

In-text: (Gurvich and Pipes, 1995)

Your Bibliography: Gurvich, M. and Pipes, R., 1995. Strength size effect of laminated composites. Composites Science and Technology, 55(1), pp.93-105.

In-text: (Hagstrand, Bonjour and Månson, 2005)

Your Bibliography: Hagstrand, P., Bonjour, F. and Månson, J., 2005. The influence of void content on the structural flexural performance of unidirectional glass fibre reinforced polypropylene composites. Composites Part A: Applied Science and Manufacturing, 36(5), pp.705-714.

In-text: (Hara et al., 2010)

Your Bibliography: Hara, E., Yokozeki, T., Hatta, H., Ishikawa, T. and Iwahori, Y., 2010. Effects of geometry and specimen size on out-of-plane tensile strength of aligned CFRP determined by direct tensile method. Composites Part A: Applied Science and Manufacturing, 41(10), pp.1425-1433.

In-text: (Hara et al., 2010)

Your Bibliography: Hara, E., Yokozeki, T., Hatta, H., Iwahori, Y. and Ishikawa, T., 2010. CFRP laminate out-of-plane tensile modulus determined by direct loading. Composites Part A: Applied Science and Manufacturing, 41(10), pp.1538-1544.

In-text: (Harris, 2003)

Your Bibliography: Harris, B., 2003. Fatigue in composites. Boca Raton, Fla.: CRC Press.

In-text: (He and Makeev, 2014)

Your Bibliography: He, Y. and Makeev, A., 2014. Nonlinear shear behavior and interlaminar shear strength of unidirectional polymer matrix composites: A numerical study. International Journal of Solids and Structures, 51(6), pp.1263-1273.

In-text: (He, Makeev and Shonkwiler, 2012)

Your Bibliography: He, Y., Makeev, A. and Shonkwiler, B., 2012. Characterization of nonlinear shear properties for composite materials using digital image correlation and finite element analysis. Composites Science and Technology, 73, pp.64-71.

In-text: (Hojo et al., 2009)

Your Bibliography: Hojo, M., Mizuno, M., Hobbiebrunken, T., Adachi, T., Tanaka, M. and Ha, S., 2009. Effect of fiber array irregularities on microscopic interfacial normal stress states of transversely loaded UD-CFRP from viewpoint of failure initiation. Composites Science and Technology, 69(11-12), pp.1726-1734.

In-text: (Hussain and Adams, 2004)

Your Bibliography: Hussain, A. and Adams, D., 2004. Analytical evaluation of the two-rail shear test method for composite materials. Composites Science and Technology, 64(2), pp.221-238.

In-text: (Hwang, Hong and Kim, 2003)

Your Bibliography: Hwang, T., Hong, C. and Kim, C., 2003. Size effect on the fiber strength of composite pressure vessels. Composite Structures, 59(4), pp.489-498.

In-text: (Jumahat, Soutis, Jones and Hodzic, 2010)

Your Bibliography: Jumahat, A., Soutis, C., Jones, F. and Hodzic, A., 2010. Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Composite Structures, 92(2), pp.295-305.

In-text: (Kar, Hu, Ahn and Nutt, 2012)

Your Bibliography: Kar, N., Hu, Y., Ahn, B. and Nutt, S., 2012. Diametral compression of pultruded composite rods. Composites Science and Technology, 72(11), pp.1283-1290.

In-text: (Kim and Hahn, 1998)

Your Bibliography: Kim, K. and Hahn, H., 1998. A stress analysis of a mechanical joint for carbon composite rods. Advanced Composite Materials, 7(2), pp.137-150.

In-text: (Koerber, Xavier and Camanho, 2010)

Your Bibliography: Koerber, H., Xavier, J. and Camanho, P., 2010. High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation. Mechanics of Materials, 42(11), pp.1004-1019.

In-text: (Kulakov, Tarnopol'skii, Arnautov and Rytter, 2004)

Your Bibliography: Kulakov, V., Tarnopol'skii, Y., Arnautov, A. and Rytter, J., 2004. Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension. Mechanics of Composite Materials, 40(2), pp.91-100.

In-text: (Lafarie-Frenot, Hénaff-Gardin and Gamby, 2001)

Your Bibliography: Lafarie-Frenot, M., Hénaff-Gardin, C. and Gamby, D., 2001. Matrix cracking induced by cyclic ply stresses in composite laminates. Composites Science and Technology, 61(15), pp.2327-2336.

In-text: (Lagattu and Lafarie-Frenot, 2000)

Your Bibliography: Lagattu, F. and Lafarie-Frenot, M., 2000. Variation of PEEK matrix crystallinity in APC-2 composite subjected to large shearing deformations. Composites Science and Technology, 60(4), pp.605-612.

In-text: (Lavoie, Soutis and Morton, 2000)

Your Bibliography: Lavoie, J., Soutis, C. and Morton, J., 2000. Apparent strength scaling in continuous fiber composite laminates. Composites Science and Technology, 60(2), pp.283-299.

In-text: (Lee and Soutis, 2007)

Your Bibliography: Lee, J. and Soutis, C., 2007. A study on the compressive strength of thick carbon fibre–epoxy laminates. Composites Science and Technology, 67(10), pp.2015-2026.

In-text: (Lemanski and Sutcliffe, 2012)

Your Bibliography: Lemanski, S. and Sutcliffe, M., 2012. Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness. Composites Part A: Applied Science and Manufacturing, 43(3), pp.435-444.

In-text: (Liu, Zhang, Wang and Wu, 2006)

Your Bibliography: Liu, L., Zhang, B., Wang, D. and Wu, Z., 2006. Effects of cure cycles on void content and mechanical properties of composite laminates. Composite Structures, 73(3), pp.303-309.

In-text: (Lu, Kao and Su, 1998)

Your Bibliography: Lu, W., Kao, P. and Su, A., 1998. Flexural failure of unidirectional carbon/epoxy composites: Effects of interleaving and flexural rate. J Polym Res, 5(3), pp.133-142.

In-text: (Makeev, Carpentier and Shonkwiler, 2014)

Your Bibliography: Makeev, A., Carpentier, P. and Shonkwiler, B., 2014. Methods to measure interlaminar tensile modulus of composites. Composites Part A: Applied Science and Manufacturing, 56, pp.256-261.

In-text: (Marston et al., 1996)

Your Bibliography: Marston, C., Gabbitas, B., Adams, J., Nutt, S., Marshall, P. and Galiotis, C., 1996. Failure characteristics in carbon/epoxy composite tows. Composites Part A: Applied Science and Manufacturing, 27(12), pp.1183-1194.

In-text: (Melin and Neumeister, 2006)

Your Bibliography: Melin, L. and Neumeister, J., 2006. Measuring constitutive shear behavior of orthotropic composites and evaluation of the modified Iosipescu test. Composite Structures, 76(1-2), pp.106-115.

In-text: (Mohseni Shakib and Li, 2009)

Your Bibliography: Mohseni Shakib, S. and Li, S., 2009. Modified three rail shear fixture (ASTM D 4255/D 4255M) and an experimental study of nonlinear in-plane shear behaviour of FRC. Composites Science and Technology, 69(11-12), pp.1854-1866.

In-text: (Mujika, Carbajal, Arrese and Mondragon, 2006)

Your Bibliography: Mujika, F., Carbajal, N., Arrese, A. and Mondragon, I., 2006. Determination of tensile and compressive moduli by flexural tests. Polymer Testing, 25(6), pp.766-771.

In-text: (Mulle et al., 2009)

Your Bibliography: Mulle, M., Zitoune, R., Collombet, F., Robert, L. and Grunevald, Y., 2009. Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending. Composite Structures, 91(1), pp.48-55.

In-text: (Naito, 2013)

Your Bibliography: Naito, K., 2013. Effect of Strain Rate on Tensile Properties of Carbon Fiber Epoxy-Impregnated Bundle Composite. Journal of Materials Engineering and Performance, 23(3), pp.708-714.

In-text: (Nikishkov, Makeev and Seon, 2013)

Your Bibliography: Nikishkov, Y., Makeev, A. and Seon, G., 2013. Progressive fatigue damage simulation method for composites. International Journal of Fatigue, 48, pp.266-279.

In-text: (O’Dwyer, O’Dowd and McCarthy, 2012)

Your Bibliography: O’Dwyer, D., O’Dowd, N. and McCarthy, C., 2012. Investigation of strain hardening effects under in-plane shear of unidirectional composite materials. Computational Materials Science, 64, pp.179-182.

In-text: (Odegard and Kumosa, 2000)

Your Bibliography: Odegard, G. and Kumosa, M., 2000. Determination of shear strength of unidirectional composite materials with the Iosipescu and 10° off-axis shear tests. Composites Science and Technology, 60(16), pp.2917-2943.

In-text: (Okabe, 2002)

Your Bibliography: Okabe, T., 2002. Size effect on tensile strength of unidirectional CFRP composites— experiment and simulation. Composites Science and Technology, 62(15), pp.2053-2064.

In-text: (Olsson, 2011)

Your Bibliography: Olsson, R., 2011. A survey of test methods for multiaxial and out-of-plane strength of composite laminates. Composites Science and Technology, 71(6), pp.773-783.

In-text: (Pettersson and Neumeister, 2006)

Your Bibliography: Pettersson, K. and Neumeister, J., 2006. A tensile setup for the IDNS composite shear test. Composites Part A: Applied Science and Manufacturing, 37(2), pp.229-242.

In-text: (Pierron and Vautrin, 1998)

Your Bibliography: Pierron, F. and Vautrin, A., 1998. Measurement of the in-plane shear strengths of unidirectional composites with the Iosipescu test. Composites Science and Technology, 57(12), pp.1653-1660.

In-text: (Plumtree, Melo and Dahl, 2010)

Your Bibliography: Plumtree, A., Melo, M. and Dahl, J., 2010. Damage evolution in a [±45]2S CFRP laminate under block loading conditions. International Journal of Fatigue, 32(1), pp.139-145.

In-text: (Portnov and Bakis, 2008)

Your Bibliography: Portnov, G. and Bakis, C., 2008. Analysis of stress concentration during tension of round pultruded composite rods. Composite Structures, 83(1), pp.100-109.

In-text: (Portnov, Kulakov and Arnautov, 2007)

Your Bibliography: Portnov, G., Kulakov, V. and Arnautov, A., 2007. A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 3. Effect of grip misalignment. Mech Compos Mater, 43(6), pp.503-512.

In-text: (Robinson, Greenhalgh and Pinho, 2012)

Your Bibliography: Robinson, P., Greenhalgh, E. and Pinho, S., 2012. Failure mechanisms in polymer matrix composites. Cambridge, UK: Woodhead Publishing.

In-text: (Saarela, 2003)

Your Bibliography: Saarela, O., 2003. Komposiittirakenteet. Helsinki: Muoviyhdistys.

In-text: (Schneider and Lauke, 2007)

Your Bibliography: Schneider, K. and Lauke, B., 2007. Determination of Compressive Properties of Fibre-Reinforced Polymers in the In-Plane Direction According to ISO 14126. Part 2: A Critical Investigation of Failure Behaviour. Applied Composite Materials, 14(3), pp.177-191.

In-text: (Scott et al., 2012)

Your Bibliography: Scott, A., Sinclair, I., Spearing, S., Thionnet, A. and Bunsell, A., 2012. Damage accumulation in a carbon/epoxy composite: Comparison between a multiscale model and computed tomography experimental results. Composites Part A: Applied Science and Manufacturing, 43(9), pp.1514-1522.

In-text: (Seon, Makeev, Nikishkov and Lee, 2013)

Your Bibliography: Seon, G., Makeev, A., Nikishkov, Y. and Lee, E., 2013. Effects of defects on interlaminar tensile fatigue behavior of carbon/epoxy composites. Composites Science and Technology, 89, pp.194-201.

In-text: (Shokrieh, Heidari-Rarani and Ayatollahi, 2012)

Your Bibliography: Shokrieh, M., Heidari-Rarani, M. and Ayatollahi, M., 2012. Delamination R-curve as a material property of unidirectional glass/epoxy composites. Materials & Design, 34, pp.211-218.

In-text: (Sket et al., 2014)

Your Bibliography: Sket, F., Enfedaque, A., Alton, C., González, C., Molina-Aldareguia, J. and Llorca, J., 2014. Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates. Composites Science and Technology, 90, pp.129-138.

In-text: (Squires, Netting and Chambers, 2007)

Your Bibliography: Squires, C., Netting, K. and Chambers, A., 2007. Understanding the factors affecting the compressive testing of unidirectional carbon fibre composites. Composites Part B: Engineering, 38(4), pp.481-487.

In-text: (Sutherland, Shenoi and Lewis, 1999)

Your Bibliography: Sutherland, L., Shenoi, R. and Lewis, S., 1999. Size and scale effects in composites: II. Unidirectional laminates. Composites Science and Technology, 59(2), pp.221-233.

In-text: (Talreja and Gamsted, 1999)

Your Bibliography: Talreja, R. and Gamsted, E., 1999. Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics. Journal of materials science, 34(11), pp.2535-2546.

In-text: (Tarnopol'skii and Kulakov, 2001)

Your Bibliography: Tarnopol'skii, Y. and Kulakov, V., 2001. Mechanics of Composite Materials, 37(5/6), pp.431-448.

In-text: (Thionnet, Chou and Bunsell, 2014)

Your Bibliography: Thionnet, A., Chou, H. and Bunsell, A., 2014. Fibre break processes in unidirectional composites. Composites Part A: Applied Science and Manufacturing, 65, pp.148-160.

In-text: (Thomsen and Kratmann, 2010)

Your Bibliography: Thomsen, O. and Kratmann, K., 2010. Experimental Characterisation of Parameters Controlling the Compressive Failure of Pultruded Unidirectional Carbon Fibre Composites. AMM, 24-25, pp.15-22.

In-text: (Totry, Molina-Aldareguía, González and LLorca, 2010)

Your Bibliography: Totry, E., Molina-Aldareguía, J., González, C. and LLorca, J., 2010. Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites. Composites Science and Technology, 70(6), pp.970-980.

In-text: (Turon et al., 2005)

Your Bibliography: Turon, A., Costa, J., Maimí, P., Trias, D. and Mayugo, J., 2005. A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation. Composites Science and Technology, 65(13), pp.2039-2048.

In-text: (Vargas and Mujika, 2010)

Your Bibliography: Vargas, G. and Mujika, F., 2010. Determination of In-plane Shear Strength of Unidirectional Composite Materials Using the Off-axis Three-point Flexure and Off-axis Tensile Tests. Journal of Composite Materials, 44(21), pp.2487-2507.

In-text: (Vassilopoulos and Keller, 2011)

Your Bibliography: Vassilopoulos, A. and Keller, T., 2011. Fatigue of fiber-reinforced composites. London: Springer.

In-text: (Vinciquerra and Davidson, 2004)

Your Bibliography: Vinciquerra, A. and Davidson, B., 2004. Effect of Crack Length Measurement Technique and Data Reduction Procedures on the Perceived Toughness from Four-Point Bend End-Notched Flexure Tests. j reinf plast comp, 23(10), pp.1051-1062.

In-text: (Waas and Schultheisz, 1996)

Your Bibliography: Waas, A. and Schultheisz, C., 1996. Compressive failure of composites, part II: Experimental studies. Progress in Aerospace Sciences, 32(1), pp.43-78.

In-text: (Wang, Nakata, Takao and Matsubara, 2009)

Your Bibliography: Wang, W., Nakata, M., Takao, Y. and Matsubara, T., 2009. Experimental investigation on test methods for mode II interlaminar fracture testing of carbon fiber reinforced composites. Composites Part A: Applied Science and Manufacturing, 40(9), pp.1447-1455.

In-text: (Wharmby, 2003)

Your Bibliography: Wharmby, A., 2003. Observations on damage development in fibre reinforced polymer laminates under cyclic loading. International Journal of Fatigue, 25(5), pp.437-446.

In-text: (Wisnom, 1999)

Your Bibliography: Wisnom, M., 1999. Size effects in the testing of fibre-composite materials. Composites Science and Technology, 59(13), pp.1937-1957.

In-text: (Wisnom, Reynolds and Gwilliam, 1996)

Your Bibliography: Wisnom, M., Reynolds, T. and Gwilliam, N., 1996. Reduction in interlaminar shear strength by discrete and distributed voids. Composites Science and Technology, 56(1), pp.93-101.

In-text: (Zhan-Sheng Guo, Ling Liu, Bo-Ming Zhang and Shanyi Du, 2006)

Your Bibliography: Zhan-Sheng Guo, Ling Liu, Bo-Ming Zhang and Shanyi Du, 2006. Critical Void Content for Thermoset Composite Laminates. Journal of Composite Materials, 43(17), pp.1775-1790.

In-text: (Zidek and Völlmecke, 2014)

Your Bibliography: Zidek, R. and Völlmecke, C., 2014. Analytical studies on the imperfection sensitivity and on the kink band inclination angle of unidirectional fiber composites. Composites Part A: Applied Science and Manufacturing, 64, pp.177-184.